Exit Grease


EXIT GREASE

An Economical Multi Purpose Quick Break Degreaser for removing Grease and Grime on Motors, Machinery, Workshop Floors and General Plant Maintenance.

Mining Vehicles:

Apply neat as received from the Distributor either by Low Volume Low Pressure Spray or Hydro Foamer system and leave in contact with surface for 5-10 Minutes. Assist the process with Manual scrubbing if necessary and rinse with high pressure water (preferably hot for best results) Exit Grease can be used neat for stubborn applications or diluted for light dust and grime applications refer to the distributor for technical assistance on dilution ratios.

This application was Red Dust/Dirt that was embedded into the tyres over a long period of time, Exit Grease made light work of bringing back these tyres to looking like new.

Workshop Floor Cleaning:

Apply Exit Grease as received by the Distributor Neat either by Low Volume Low Pressure Spray or Hydro Foamer system and leave in contact with surface for 5-10 Minutes. Assist the process with manual scrubbing if necessary and rinse with high pressure water (preferably hot for best results)

Workshop floors stained for years are no match for Exit Grease, the picture above was taken from a workshop floor that was a continuing problem for our client before they started using Exit Grease.

Oilfield and Mining Equipment and Machinery

Above pictures show the before and after of 7” Production Tubing that had Exit Grease applied to the connections of each joint. Contact time was 10 minutes and then high pressure washed off, all traces of the dope were removed leaving a clean connection for 3rd party inspection.

One half of an Oilfield Services Casing Elevator/Spider which has been disassembled and ready for cleaning, typically these units come back to town covered in grease, thread compound, drilling based muds and brine.

A light spray application of Exit Grease followed by contact time of 10 minutes and then high pressure washed, brought the elevator back clean and ready for service and maintenance. Exit Grease proved to be more efficient and produced a quicker and superior result to the chemical that was used onsite, saving considerable manpower costs and less chemical usage.

PLEASE NOTE THIS PRODUCT IS NOT SUITABLE FOR ALUMINIUM AND ALLOYS, RED ROAR IS A SUITABLE REPLACEMENT IN THESE APPLICATIONS.

Before and After pictures of an underground Mining Vehicle that was in for repair, this machine was baked with Grease, Grime and Red Dirt and the client had been having trouble cleaning their machinery and still staying inside the Environmental footprint.

DBR provided a demonstration on EXIT GREASE and as you can see it has proven very successful from the pictures above.

DBR Industrial Products are proud to advise that we are a wholly Western Australian owned and operated Company. Servicing the Mining, Oil and Gas, Power Generation and Gold Processing sectors. DBR can provide solutions for the majority of your cleaning and degreasing applications with environmentally friendly products.


Available in 1, 5, 20, 200 & 1,000 litre containers.

DBR Industrial Products PTY LTD
16 Irwin Street
Bellevue WA 6056
P:
 +61 8 9374 0386
E: sales@dbrip.com.au

Download:
Technical Data Sheet here: ExitGrease-TDS
Material Safety Data Sheet: DBR Exit_Grease-SDS